Excellent power press machine factory with pressmachine-world.com? World has been committed to the development and production of power press machines since it was established in 1953. More than 100 experienced engineers are working in the three R&D centers, one in Shanghai, one in factory and another one in Ningbo. See more info on bending press machine. Through this partnership of shared experience and ideas, we are confident that we can realize your current and future requirements on WORLD press machine.
The imprint bending is the same as the bending of the bottomed die, except that the front end of the punch is processed to the required bending radius, and the gap between the punch and the die at th bottom of the stroke is smler than the material thickness. Since enough presure approximately 10 timesof fee bendig is applied to force the front end of the punchto contact the material, springback is basically avoided.
Main features: Adopt all-steel welded structure, with sufficient strength and rigidity; Hydraulic drive, the oil cylinders at both ends of the machine tool are placed on the sliding block to directly drive the sliding work; The slider synchronization mechanism adopts torsion shaft for forced synchronization; Using mechanical block structure, stable and reliable; The stroke of the slider can be adjusted quickly by motor, fine-tuned manually, and the counter is displayed; Oblique wedge-type deflection compensation mechanism to ensure higher bending accuracy.
When free bending is used, the bending radius is 0.156 times the opening distance of the die. During the free bending process, the opening distance of te die shoul b 8 tms te thickness of the metal material. For example, when using 1/2 inch (0.0127 m) open distance to form 16 gage mild see, the bendig adis o the par is about0.078 inches. I h bndig radius is almost as small as the material thickness, a bottomed die must be formed. However, the pressure required for forming a bottomed die is about 4 times greater than that of free bendingIf the bendig radius is less than the thickness of the material, a punch wit afrontend filet radus smaller than the thickess of the material must be used, and the imprint bending methoc must be used. In this way, 10 times the pressure of free bending is required.
The companies of the world machinery have already supported their customers with appropriate solutions for demanding tasks in the past. Thanks to the experience gained from many different projects in this area, the world machinery continuously optimizes their cometencis in termsofresidua srest, latnes lel and cu qualit of strips and sheets to meet the highest requiremens. In additon, speed and surface protection play an important role in machining and must be taken into account in all approaches to process improvement. An important prereqisite for these processes is a perfectly aligned. The world machinery has mad itit buines o react to these challenges and problems with the help of its decades of experience and to offer technologically mature solutions in the field of straightening and decoiling technology, strip feeding systems and automation. Read even more details on https://www.pressmachine-world.com/.