High quality V-hold Machinery manufacturer: M521GH High Speed Moukder has superior material delivery system. The highest feeding speed can up to 60m/min with automatic feeding system. Professional solution for planning large amount of wood material. This machine can largely reduce processing time of wood, it improve efficiency and help reduce labour cost. The side feeding mechanism which is installed in in-feed table can ensure the wood material to be fed continuously in high speed. Equipped with gear case for short material to achieve continuously feeding and smooth cutting. Find additional details on 4 sided moulder.

A beam saw cuts panels and sheet materials to the size required. It can deal with MDF, insulation, plastics and laminated boards. A clamping beam keeps the boards in place while the mobile saw carriage moves underneath the material. This type of saw has a computer control allowing you to automate as well as making multiple cuts. These machines can also be linked to computer software that optimises your yield. A beam saw is designed for repetitive, accurate cutting to size, making them the most cost-effective at precision panel cutting. Front loading beam saw – the user loads the materials into the front of the machine. Rear loading beam saw – the user places the materials on to an automatic lift table which will automatically be loaded into the back of the beam saw.

Composite presses deal with composite materials that need to be shaped into a usable product. The automotive trade use them to shape carbon fibre panels and battery boxes for electric cars. The aero space industry use them for shaping light weight panels and seat covers. The military use them to create bullet proof floor pans for military vehicles. The refrigeration industry use them to create cold storage insulation panels for fridges. The job of a laminate press is to bond layered materials together to create a stronger material than the original, and also for cosmetic purposes. Many laminating processes involve coating a film, plastic, metal, wood, or other substrate with a surface to strengthen it to be used for a much broader range of purposes.

The chain mortiser is primarily used for making mortises in doors and windows. It carries an endless chain which has saw type teeth on its outer surface. The chain revolves around a guide bar and cuts the stock. The mortise of the desired length is produced with round bottom corresponding to the profile of the revolving chain. The oscillating bit mortiser carries a oscillating router bit and produces comparatively small mortises suitable for small cabinet and chair work.

Presses come in various sizes and with various powers/pressures. The presses can be easily adapted to fit a businesses personal requirements. Automated press lines are designed in conjunction with all through-feed press options to be fully automatic or semi-automatic. They can start at the brushing stage where the material is cleaned, through to gluing, pressing then cutting. Modern presses fall into two categories: down-acting and up-acting. A down-acting machine has an upper beam that moves downwards to bring the tooling together. An up-acting machine has a lower beam that moves upwards to do the same. Each machine has its own strengths and limitations.

The band is available in two models, vertical and horizontal. In the former, two wheels are arranged side by side and the table is mounted underneath. In the latter model, Frame illustrated in Fig. 10.55, the wheels are arranged one above the other in a vertical plane below the table and the band passes through the table. As in the case of the circular table, angular cuts are obtained by tilting the saw table. The size of the band saw is specified as the distance from the saw band to the inner side of the frame. The distance is roughly equal to the diameter of the wheels.

The wood is fixed between the headstock and tailstock of the lathe. The headstock houses the motor that spins the work-piece. The tailstock is adjustable, moving along the length of the bed to fit work-pieces of various lengths. Once the work-piece is locked in place, the tool rest is set into position. The spinning work-piece is then shaped using a chisel or gouge held fast to the tool rest. Face-plate turning, in with the work-piece is fastened with screws to the face plate of the drive spindle, allows the woodworker to produce bowls and other hollow goods. Read extra info on https://www.v-holdmachinery.com/.